|
Floriani
Heat N Gone®
Heat
Removable Topping and Stabilizer
Use
this clear, 100% heat removable film as a topping or stabilizer
on all fabrics that can withstand an iron temperature of
260° - 300° F (120°-140° C). Great when
giving a gift and you need instant stabilizer removal or
when your fabric cannot withstand moisture.
-
Clear and Easy to see through
-
Easy
to remove
-
Embossed
backside prevents curling and shifting
-
Perfect
for fabrics that can't be wet such as velvet, wool,
satin, etc.
-
Trace
intricate quilt patterns onto Heat N Gone® for an
easy guide when free motion quilting or thread painting.
-
Prevents
loops from sneaking back through on high pile fabrics
such as towels and terry cloth.
To
use as a topping:
- Place
a piece of Heat N Gone® on the surface of the hooped
item, bumpy side touching the fabric, and secure the
outer corners with pins or tape to prevent curling.
- Complete
the embroidery design.
- Tear
away as much of the Heat N Gone® as possible.
-
Place your heated iron directly on top of the garment
to remove the excess stabilizer. Be sure your iron temp
is at least 260° F (120°C). This temperature
should be similar to a cotton setting on most household
irons.
To
use as a stabilizer:
-
Place
a piece of Heat N Gone® within the hoop with the
item to be embroidered. Use a piece at least one inch
larger than the outer perimeter of the hoop and place
the bumpy side of the stabilizer against the fabric.
-
Embroider the design.
-
Tear away as much of the Heat N Gone® as possible.
Place your heated iron directly on top of the garment
to remove the excess stabilizer. Be sure your iron temp
is at least 260°F (120°C). This temperature
should be similar to a cotton setting on most household
irons.
*To
clean your iron of any residue, heat the iron up to its
highest temperature and move the irons surface back and
forth over a wet towel firmly. Iron cleaners such as Dritz
and Niagra work also.
Product
Identity
FHG10
10” x 10yds
FHG25 10” x 25 yds
FHG20
20 x 10yds
|
|
