|
Heat N Sta Fusible Fleece® &
Heat N Sta Fusible Light Fleece®
Add
dimension to your embroidery and quilting projects with
Floriani Heat N Sta Fleece®. Create soft home
dec items such as placemats, table runners and crib quilts.
This unique product is similar to traditional quilt batting
only with a fusible side to keep the fleece in place while
stitching through it! Heat N Sta Fleece® is ideal for
machine embroidered or T-Shirt quilts as it does not have
to be quilted to maintain the fibers of the batting. It
is machine washable, dryer and/or drycleaner safe.
Enjoy
the softness and flexibility of Heat N Sta Fusible Light
Fleece®. This super light, fusible quilt batting
allows you to create "non-bulk" quilted garments
that move with you or adorable baby quilts that will pack
in a diaper bag. Full size quilts, hand bags and pillows
will be noticeably perfect and easily constructed.
The
uses for both of these unique and versatile products are
unlimited and because it is fusible, stitching can be as
random as you desire!
Prepping
your fabric and fusible fleece:
-
If using a fabric that has a risk of shrinkage, it is
advised to pre-shrink the fabric by pre-washing.
-
Pre- shrink Floriani's fusible fleece by gently steaming
the non-fusible side with steam just before pressing
it to the fabric.
-
Try something fun and different!! If your goal is to
have an antiquated looking quilt, do not pre-wash or
pre-shrink your fabric and/or fusible fleece. When washed
in warm water the fabric will slightly draw around the
fused fleece creating a very unique quilted look. This
technique works beautifully with redwork designs on
premium quilt cotton
|
|
Fusing
Heat N Sta Fleece® to Fabric:
Fuse
the shiny, textured side of Floriani's Heat N Sta Fleece®
or Light Fleece to the back of the fabric using a Medium setting
on your iron or press. Steam is not necessary but will not harm
the fleece if you use it while pressing the item. Be sure your
iron touches the fabric, NOT the fleece. Use a press cloth if
necessary. **Remember that steam will cause slight shrinkage in
your fleece and fabric. Prep your materials by pre-shrinking if
this is not your overall goal for the piece you are working on.
**Just
like traditional quilt batting, it is also recommended to cut
Floriani's Heat N Sta Fleece® at least one inch larger than
your fabric piece and then trim to size once it is fused in to
place.
**Because
all irons vary in temperature settings, start at a lower setting
when fusing the fabric and fleece and gradually increase the heat
setting until you get a good fuse!
Sizes
available:
Heat
N Sta Fusible Fleece 45" x 5 yards or 45" x 1 yard
Heat N Sta Light Fusible Fleece - 59" x 5 yards or 59"
x 1 yard
Floriani's
Heat N Sta Fleece (Fusible) Product Identity
FHSF
45" x 1 yd
FHSF5 45" x 5 yds
FHSF15 45" x 15 yds
|
