|
Dissolve
Magic
Woven
Water Soluble Stabilizer
Use Dissolve
Magic Stabilizer to create elegant perfect lace, free standing
embroideries or appliqués. Stabilize your most sheer,
delicate fabrics such as organdy and netting for flawless
embroidery! Enjoy the stability of a woven stabilizer that
truly supports your stitching and then will completely rinse
away leaving soft embroidery behind. Most designs only require
one layer!
- Create free
standing lace and use just one layer for most designs
- Perfect for
making appliqués, decorative pins and/or 3-D embroidery.
- Rinses clean
leaving no messy residue
- Use as a topping
for wide satin stitch designs on high pile fabrics for
perfect results!
To use Dissolve
Magic for free standing lace and/or embroideries:
- Hoop one layer
of the stabilizer within the embroider frame.
- Embroider
the design.
- Remove the
stabilizer from the hoop and trim away as much as possible.
- Rinse away
the remaining Dissolve Magic using cool water. *Tip
- If your desire is to have the lace stiff,
simply get the embroidery wet. Don't rinse! Once it is
wet, the stabilizer will be absorbed into the stitching
and will dry stiff.
**Note:
Not all lace is considered "Free Standing". If
your desire is to have your embroidery stand on its own,
please make sure that the packaging states that the design
is for "Free Standing Lace Embroidery".
*Some
lace embroideries may require the use of two layers of Dissolve
Magic if it is overly dense or stitch intensive.
Sizes
available: 12" x 12 yds, 20" x 12 yds
|
