|
Tearaway
Magic
Eco-Friendly
Light Tearaway Stabilizer
This eco friendly tearaway
stabilizer is ideal for airy, open work embroidery designs on
light cottons and linen. It's unique because it is made up of
partially water soluble fibers. By wetting the design once it
is complete the stabilizer is easily torn away without distorting
stitches or harming any delicate fibers of heirloom quality fabrics.
The design will retain the non-soluble part of the stabilizer
throughout the life of the garment; keeping the embroidery looking
smooth. Any remnants of the stabilizer around the design will
wash out through multiple launderings.
This product is also
available in printable 8 ½" x 11" sheets making
it ideal for paper/foundation-piecing designs and templates. Try
the fusible version of Tearaway Magic when doing embroidery on
loosely woven versions of the fabrics mentioned above that tend
to shift during the hooping and embroidery process.
-
Easy
to remove from around delicate embroidery or machine stitching.
-
Won't
shadow through light colored fabrics.
-
Eliminates
countless hours of "picking" out stabilizer remnants.
-
Super
stable and will support about 8,000 stitches if the design
is well-digitized.
-
Perfect
for stabilizing satin stitching when doing machine appliqué.
To use Tearaway Magic:
-
Hoop
one layer of the stabilizer within the frame with the garment
or fabric. Be sure to use a piece at least one inch larger
than the outer parameter of the embroidery frame.
-
Embroider
the design. *Tip - If the design
is denser than 8,000 stitches or if it is a poorly digitized
design (too many stitches for design size), float an additional
layer of Tearaway Magic between the hoop and the bed of the
machine for each additional 8,000 stitches for added support!
-
Remove the hoop from the machine and from the garment.
-
Tear away as much of the Tearaway Magic stabilizer as possible
*Optional - Wet around the edge
of the design using a sponge, foam paint brush or envelope
sealer. Wait about 5 seconds to allow the water to activate
the water soluble portion of the stabilizer.
-
Stabilizer
remnants will continue to wash out in the laundry with a mild
detergent and agitation.
Sizes available: 12"
x 10 yds, 20" x 10 yds, 8.5" x 11" sheets
|
