| Click on images for larger detailed view. |
|
|
1. |
Open
your appliqué embroidery design in your machine
software. *Reverse the image
|
| 2. |
Print the
image onto the paper side of Web Magic. *Be sure your software
and printer are set to print the design in the actual size
of the embroidery. |
 |
| 3. |
Fuse
the printed Web Magic to the wrong side of the appliqué
fabric. |
 |
 |
| 4. |
Trim
the appliqué piece around the outside edge and set
aside. |
| 5. |
Load
the embroidery design into your machine and forward to the
placement outline stitch. |
| 6. |
Hoop
the base material and stitch the placement outline. |
 |
| 7. |
Peel back the release paper from the back of the appliqué
exposing the adhesive. |
| 8. |
Stick
the appliqué down to the stitched outline. |
 |
| 9. |
Embroider
the remaining colors of the design. |
 |
Finished
quilt square |
**An alternative
to step 1 and 2 is to place the Web Magic in your
embroidery frame and stitch the outline! Use a light
colored thread but one you can see to trim around.
This will also insure that your image will be the
exact embroidered size. Once the outline is stitched
on the Web Magic remove the piece from the embroidery
frame and trim it down, but not too close to the outline,
save that for step 4! Continue with step 3. |
|
