|
Floriani
Medium Tearaway
Floriani
Medium Tearaway is manufactured using a unique process called
the "Delta Wet Laid Non-Woven" technique. The benefit
of using this method of production is that the product is very
solid, when closely examined you will see no thick and/or thin
spots. When used as an embroidery stabilizer, it is not necessary
to use multiple layers in random directions to support stitches.
Medium Tearaway is a 1.5 oz, clean tear stabilizer. It is the
best choice for a supplement stabilizer when working on high stitch
count designs in conjunction with your other stabilizers such
as No Show Nylon Mesh, Heat N Sta® Tearaway or Wet N Stick®.
It provides back up support without adding unwanted bulk.
-
Use
to support embroidery designs on towels, denim or other "stable"
woven fabrics
-
Tears
clean from around most embroidery designs
-
Will
support about 8,000 stitches on a well-digitized, average
size design
-
Use in conjunction with other stabilizers for added support
To
use Floriani Medium Tearaway:
-
Cut
a piece of the stabilizer at least one inch larger than the
hoop size you are planning to use.
-
Hoop the stabilizer to the wrong side of the fabric.
-
Place
the embroidery frame on the machine; complete the layout and
centering of the design.
-
If the design to be stitched is denser than 8,000 stitches
or if it is a poorly digitized design (too many stitches for
designs size), float an additional layer of Floriani Medium
Tearaway between the hoop and the bed of the machine for each
additional 8,000 stitches for added support!
-
Once the design is complete, remove the hoop and fabric from
the machine. Tear away the stabilizer from around the design
one layer at a time.
 Floriani's
Medium Tearaway Product Identity
FTM1210 12" x 10 yds 1.5oz
FTM1225 12" x 25 yds 1.5oz
|
