Floriani
No Show Nylon Mesh
"No
Show" Nylon Mesh is designed for a single layer application,
and features the most stable no show mesh on
the market.
 
Floriani
No Show Nylon Mesh is a 1.5 oz sheer cutaway available in white
and beige. Unlike traditional cutaway, this product will not shadow
through on light colored fabrics such as knits. Its softness makes
it ideal for children's clothing and baby garments. The unique
embossing pattern of this product makes it a staple in your embroidery
stabilizers. Hoop the stabilizer to the back of the garment or
fabric for soft flexible support for light fabrics and designs.
This product is also available in a fusible version which eliminates
the need for messy spray adhesives.
-
Will
support around six to eight thousand stitches on an average
size, well-digitized embroidery design (4" x 4").
-
Will
not shadow through on light weight cottons and knits when
worn against the skin.
-
Perfect
foundation for crazy patch quilting.
-
Ideal
foundation for patches, emblems and free standing embroideries.
To
use Floriani No show Nylon Mesh:
-
Cut
a piece of the stabilizer at least one inch larger than the
hoop size you are planning to use.
-
Hoop
the stabilizer to the back of the garment.
-
Place
the embroidery frame on to the machine. Complete the layout
and centering of the design.
-
Important!
If the design is denser than 6,000 stitches or if it is a
poorly digitized design (too many stitches for designs size),"float"
one layer of Floriani Medium Tearaway between the hoop and
the bed of the machine for each additional 8,000 stitches
for added support! After the design is complete the tear away
can be removed leaving just the soft mesh against the skin.
-
After
the design is complete, remove the garment from the machine
and embroidery hoop. Trim the stabilizer as close to the design
as possible.
*Tip! If embroidering knit, don't forget to use topping!
*Tip! To get extra support on large or problem designs without
adding bulk, try crossing two layers of the mesh when hooping,
one at 90°and the other at 45°. This will offer a
tremendous amount of stabilization without stiffness.
|
Did
you know that your Floriani No Show Nylon Mesh is a great
way to create free standing embroidery designs that you
can adhere or appliqué to any surface? Think of the
possibilities! Now you can have your beautiful embroideries
on the most delicate fabrics or the oddest or most difficult
foundations! Click on the link below to check out the projects
page for this exciting technique.
Click here for our Easy Free
Standing Embroidery projects featuring this product!
Floriani's
No Show Mesh Product Identity
White
FMWH1210 12" x 10 yds 1.5
oz
FMWH1225 12" x 25 yds 1.5
oz
Beige
FMBE1210 12" x 10 yds 1.5
oz
FMBE1225 12" x 25 yds 1.5
oz
|
 |
 |
|
