Heat Removable Topping and Stabilizer Use this clear, 100% heat removable film as a topping or stabilizer on all fabrics that can withstand an iron temperature of 260° - 300° F (120°-140° C). Great when giving a gift and you need instant stabilizer removal or when your fabric cannot withstand moisture. -
Clear and Easy to see through
-
Easy to remove
-
Embossed backside prevents curling and shifting
-
Perfect for fabrics that can't be wet such as velvet, wool, satin, etc.
-
Trace intricate quilt patterns onto Heat N Gone® for an easy guide when free motion quilting or thread painting.
-
Prevents loops from sneaking back through on high pile fabrics such as towels and terry cloth. To use as a topping: - Place a piece of Heat N Gone® on the surface of the hooped item, bumpy side touching the fabric, and secure the outer corners with pins or tape to prevent curling.
- Complete the embroidery design.
- Tear away as much of the Heat N Gone® as possible.
- Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260° F (120°C). This temperature should be similar to a high wool setting on most household irons.
**Stainless Steel Iron recommended for best results. To use as a stabilizer: -
Place a piece of Heat N Gone® within the hoop with the item to be embroidered. Use a piece at least one inch larger than the outer perimeter of the hoop and place the bumpy side of the stabilizer against the fabric.
-
Embroider the design.
-
Tear away as much of the Heat N Gone® as possible.
Place your heated iron directly on top of the garment to remove the excess stabilizer. Be sure your iron temp is at least 260°F (120°C). This temperature should be similar to a high wool setting on most household irons. *To clean your iron of any residue, heat the iron up to its highest temperature and move the irons surface back and forth over a wet towel firmly. Iron cleaners such as Dritz and Niagra work also. | 
|
