|
Floriani
PRESS N BOND®
Use
this "no sew" bonding material to adhere patches, appliqués
and embroideries to most fabrics without stitching!
Press
N Bond withstands laundering and dry cleaning and will create
a permanent bond between fabric surfaces when heat is applied.
NO sewing is required! Adheres to Vinyl, Polyester, Cotton, Polycotton
and most other fabrics.
To
Use Press N Bond®:
-
Trace
or print the reverse image onto the paper side of Press N
Bond.
-
Cut the shape to size.
-
Fuse
Press N Bond to the back of the fabric or embroidery. Use
an iron temperature of at least 260® (125®) and hold
pressure for at least 4 seconds.
-
Once
cooled, peel back the release paper which will expose the
fusible surface.
-
Position the patch/emblem or appliqué on the base material
and press from the fabric side. Use the same temperature settings
used in step 3 and hold the iron in place for 4 seconds in
order to melt the adhesive.
**Note:
All irons vary in temperature. The temperature given is a base
estimate. If you find that you are not getting a good bond, increase
your irons temperature until the adhesive melts.
**All
adhesives will bond more securely to fabrics that do not have
sizing or starch applied to the surface. If possible remove these
finishes before using Press N Bond.
**Press
N Bond is not recommended for items/fabrics containing Teflon.
Complete
the embroidery design or patch and remove any excess stabilizer
|
Trace
or print the reverse image onto the paper side of Press N
Bond. |
Cut
the shape to size. |
Fuse Press N Bond to the back of the fabric or embroidery.
Use an iron temperature of at least 260° (125°C) and
hold pressure for at least 4 seconds. |
Once
cooled, peel back the release paper which will expose the
fusible surface.
|
Position
the patch/emblem or appliqué on the base material and
press from the fabric side. Use the same temperature settings
used in step 3 and hold the iron in place for 4 seconds in
order to melt the adhesive.
|
No
Sew Applique has ever been easier! |
|
