|
 Floriani
Stitch N Shape®
Use
for adding shape, form and/or dimension to tote bags, placemats,
fabric bowls/boxes, hat brims, ornaments, paper dolls and more.
This remarkable product will hold its shape after it is inserted
between two layers of fabric. You can stitch or embroider directly
through it. Items constructed with Stitch N Shape® can be
laundered and then reshaped by steaming. Create unique picture
frame mats by painting, stitching or embellishing directly on
it.
Stitch
N Shape® is available in regular non-fused, single side fusible
and double side fusible.
*To
fuse fabric to Stitch N Shape® Double or Single Side Fusible:
-
Begin by laying a heat resistant product such as a Teflon
pressing sheet or parchment paper on your ironing board. If
using the Double Side Fusible version of Stitch N Shape®,
this will prevent the heat from the iron coming through the
product and fusing the Stitch N Shape® to your ironing
board cover.
-
Place
decorative fabric on top of the Stitch N Shape® (wrong
side to the fusible side) and press it in place using a small
amount of steam and a medium temperature on your iron. Remember
to press, don't "iron"!
*Tip - Since you are using steam to set the bond between the
fabric and the Stitch N Shape®, it is necessary to pre-shrink
your fabric for optimal results.
-
For
Double Side Fusible, turn the Stitch N Shape® over and
cover the exposed fusible side with the wrong side of the
decorative fabric. Press using a small amount of steam once
again.
-
Begin construction of your project, with both fabrics permanently
fused in place! Remember to stitch slowly for the best results.
If doing embroidery, set your machine speed to 600 stitches
per minute or less.
Floriani's
Stitch N Shape Product Identity
FSS1515
15" SQ (10 per pack)
FSS1510 15" x 10 yds
Floriani's
Stitch N Shape Single Side Fusible Product Identity
FSS1515SF
15" SQ (10 per pack)
FSS1510SF 15" x 10 yds
Floriani's
Stitch N Shape Double Side Fusible Product Identity
FSS1515DF
15" SQ (10 per pack)
FSS1510DF 15" x 10 yds
FSS3010DF 30" x 10 yds
|
